With so many applications for custom fabrication, it’s nice to have EnviroCon Systems on your team.

Geomembrane liners can be used in efficient stormwater management systems that consist of layers of sand, geotextiles, turf and pipes. RPE (reinforced polyethylene) is a highly preferred material for athletic field liners as it is impenetrable. It effectively prevents water from seeping into the ground, enabling rainwater to travel smoothly to a reservoir and treatment area.

These open ponds temporarily hold excess stormwater and release the runoff at a controlled rate to a downstream body of water. Common liner materials include:

• PVC (Polyvinyl Chloride)
• LLDPE (Linear Low-Density Polyethylene)

These ponds are usually constructed from an existing natural depression and are designed to retain permanent runoff. Common liner materials can include:

• Bentonite geomembranes
• EDPM (Ethylene Propylene Diene Monomer)
• HDPE (High-Density Polyethylene)

Geomembrane and geosynthetic liners act as a barrier to prevent contaminants from seeping into the ground and polluting the surrounding area. Our prefabricated frac pit and reserve pit liners can be drop-shipped or custom fabricated and installed on-site by our highly skilled field crews.

APPLICATIONS:
• Drilling pad liners
• Oil field reserve pits
• Remediation frac pits
• Saltwater disposal pits
• Temporary storage pits
• Wastewater lagoons

FEATURES:
• Custom fabricated to any size requirements
• High strength material structure
• Liner firmly anchored to anchor trench
• Variety of materials and thicknesses available

BENEFITS:
• Forms a barrier between the ground and liquid
• Helps to prevent ground water contamination
• Stores frac water and water back flow
• Can be inserted into a pit or pond
• Resists punctures and wind damage allowing prolonged use of pit

Prefabricated geomembranes rather than traditional clay or concrete systems are being utilized more frequently worldwide for irrigation canal and reservoir liners. A durable plant-safe geomembrane is an optimal liner to be utilized to prevent chemicals and other contaminants from escaping and affecting the health of crops. LDPE (low-density polyethylene) and RPE (reinforced polyethylene) materials work well for canal use.

EnviroCon Systems stocks a variety of spill containment berms for drum storage, frac trucks, pumps, roll-off boxes, and tanker trucks and can customize berms to be utilized as stand-alone units or as units housed within existing structures. Our portable berms consist of a rigid wall support system of 40 mil polyethylene liner and angles and are ready for quick assembly and installation. Before shipment, all berms undergo a thorough inspection from our quality control team to ensure each unit meets our standards.

ADVANTAGES:
• Compact and lightweight
• Cost-effective
• Custom sizes
• Meets SPCC and EPA container storage regulation 40 CRF 264.175
• Protective pads available
• Puncture resistant
• Quick and easy set up
• Reusable and repairable
• Sidewalls lower quickly to allow drive in and drive out.
• Sidewall supports
• UV and Chemical resistant

View Standard Stock Berm Sizing

EnviroCon Systems utilizes T-Lock when installing geosynthetic liners. This HDPE extruded anchoring system provides an embedded attachment to concrete. It can insert into any face of new cast-in-place or pre-cast concrete construction and can fit around various corners and shapes.

Any HDPE liner can weld onto the T-Lock, regardless of thickness. The liner will yield before the T-Lock fails or pulls out of the concrete if experiencing high tensile loads. 

View T-Lock Specs

View T-Lock Installation Guide

Vacuum Forming:

Pipe Boots and Floats